SKILL LEVEL: ADVANCED | STANLEY PRO PROJECT GUIDES

HOW TO INSTALL A TILE BACKSPLASH

Nothing quite combines beauty and utility in a kitchen like a tile backsplash. Tile adds color and texture and can take whatever a cook throws at it. Best of all, applying tile straight-forward and, as long as you have a clean, solid wall surface, does not require cement backer board.

Tools You’ll Need: Painter’s tape, drop cloth or paper, sanding block, bucket, sponge, straight edge, thinset, 4-in. drywall blade, notched trowel, mosaic ceramic tiles, utility knife, tape measure, tile spacers, tile pliers, beater board (2x scrap covered with an old towel), hammer or rubber mallet, stone sealer, grout, grout float, cheesecloth, grout sealer, caulk gun, caulk.

How to Install a Tile Backplash - Step 13

Step 1:  Prepare the Site

Turn off power to any switches or receptacles and then remove the covers. Tape over the devices. Tape paper or a drop cloth to the counter. Remove any wallpaper or loose paint. Sand the wall for good adhesion and clean the surface thoroughly. Let it dry.

How to Install a Tile Backplash - Step 1
Prep work area
How to Install a Tile Backplash - Step 2
Turn off power

Step 2: Dry Fit the Tiles

Dry fit the tiles using rubber tile spacers to determine the layout. Here, we’re installing a diamond pattern and precut several tiles to have full-half-tiles along the bottom with evenly split tiles in the corner.

How to Install a Tile Backplash - Step 3

Step 3: Use a Wet Tile Saw to Cut Tiles

Cutting tiles is often necessary to tile around obstructions and in corners. Wet tile saws are available for rent at most home centers.

How to Install a Tile Backplash - Step 4
Cut on wet tile saw

Step 4: Mix Thinset

Be sure to follow all manufacturer instructions when preparing.

How to Install a Tile Backplash - Step 5

Step 5: Apply Thinset

Check the thinset manufacturer’s specs for the recommended trowel notch size (a 1⁄8-in. V-groove is common). Apply the thinset, first ladling it on with a drywall blade, then carefully working it with the notched trowel. Apply thinset to a small working area to start.

How to Install a Tile Backplash - Step 6
Apply thinset

Step 6: Place Tiles and Spacers

Begin installing tiles by pressing them firmly into the thinset. To ensure that the tiles line up and to maintain consistent grout lines, add a spacers between tiles as you work across the wall.

How to Install a Tile Backplash - Step 7

Step 7: Let Thinset Dry for 24 Hours

How to Install a Tile Backplash - Step 8

Step 8: Remove Spacers

Remove spacers and scrape away any excess thinset on or between tiles.

How to Install a Tile Backplash - Step 9
Remove spacers

Step 9: Apply Grout

Apply grout following manufacturers instructions. Apply around all tiles except along the bottom edge where sanded caulk is used to complete the installation.

How to Install a Tile Backplash - Step 10
Apply grout
How to Install a Tile Backplash - Step 11
How to Install a Tile Backplash - Step 12

article disclosure

To reduce the risk of personal injury and property damage, read and follow all related product manufacturers instruction manuals and information before performing any of the applications shown. Some construction-related applications shown may not be allowed in your local area. Consult your local authority having jurisdiction (AHJ) before starting work for information on permits, applicable codes, and other regulations. STANLEY disclaims any responsibility for any damage to property or injury to persons as a result of misuse of the information provided.